Slot Weld Symbol

Holes or slots in the arrow side member of a joint for plug or slot welding must be indicated by placing the weld symbol on the side of the reference line toward the reader (A, fig. 3-11).

• Aws Plug Weld Welding Symbols
• Slot Weld Symbol
• Weld Symbol For Slot Weld

Spot Weld The spot weld symbol is simply a circle that may be placed above, below, or centered on the reference line. When the symbol is centered on the reference line this indicates that there is no side significance. As a result, plug and slot welds are normally used just for stitching different parts of the members together. Welding Symbols. A shorthand notation giving important information on the location, size, length, etc. For the various types of welds was developed by the American Welding Society to facilitate the detailing of welds.

Holes or slots in the other side member of a joint shall be indicated by placing the weld symbol on the side of the reference line away from the reader (B, fig. 3-11).

Neither the plug weld symbol nor the slot weld symbol may be used to designate fillet welds in holes.

Plug or Slot Weld Diagram

Arrow Side & Other Side Indication of a Slot or Plug Weld Symbol

Slot or Plug Welding Symbol

Plug & Slot Welds Indicated by Arrow on Side of Joint

Plug Weld Dimensions

Dimensions of plug welds must be shown on the same side of the reference line as the weld symbol. The size of a weld must be shown to the left of the weld symbol.

The included angle of countersink of plug welds must be the user’s standard unless otherwise indicated.

Aws Plug Weld Welding Symbols

The included angle of countersink, when not the user’s standard, must be shown either above or below the weld symbol (A and C, fig. 3-34).

The pitch (center-to-center spacing) of plug welds shall be shown to the right of the weld symbol.

Dimensions, Details and Surface Contour of Plug or Slot Welds

Slot Weld Symbol

Depth of Filling of Plug and Slot Welds

Depth of filling of plug and slot welds shall be completed unless otherwise indicated. When the depth of filling is less than complete, the depth of filling shall be shown in inches inside the weld symbol (B, fig. 3-34).

Surface Contour of Plug Welds and Slot Welds

Plug welds that are to be welded approximately flush without recourse to any method of finishing must be shown by adding the finish contour symbol to the weld symbol (fig. 3-35).

Plug welds that are to be welded flush by mechanical means must be shown by adding both the flush contour symbol and the user’s standard finish symbol to the weld symbol (fig. 3-36).

Slot Weld Dimensions

Dimensions of slot welds must be shown on the same side of the reference line as the weld symbol (fig. 3-37).

Weld Symbol For Slot Weld

Details of Slot Welds

Length, width, spacing, included angle of countersink, orientation, and location of slot welds cannot be shown on the welding symbols.

This data must be shown on the drawing or by a detail with a reference to it on the welding symbol, in accordance with location specifications given in paragraph 3-7 (D, fig. 3-33).